Page 328 of 427

Re: Screenshots & Videos

Posted: 13 Apr 2021, 07:47
by luka23
If only...

Re: Screenshots & Videos

Posted: 13 Apr 2021, 10:29
by Domi2005
On the occasion of the release of the new Paris metros, I've decided to revisit some of the Alstom metros on Simvliet first, in an alternate universe where rubber tyred metros are also used on regular metro lines.

Re: Screenshots & Videos

Posted: 17 Apr 2021, 19:01
by loris
I guess this is the longesst video that i eve made on Metro Simulator

But i really wanted to make a very detailed video about the MF67 and the MP73.

https://www.youtube.com/watch?v=UKOAZpWuhAg

Re: Screenshots & Videos

Posted: 18 Apr 2021, 12:55
by trains 500
Great work devs on the new paris rolling stock : https://www.youtube.com/watch?v=8najQlk6aJc
Image

Re: Screenshots & Videos

Posted: 21 Apr 2021, 13:46
by Alfacinha315
After the level crossing before Zeerwijk station, the trains towards Strandboulevard get a 10 limit of speed, causing delays. It is the second time this happens.

My train was the 4121EV.

I turned off the ATB, in order to reach the Zeerwijk station and cancel the service from there.

And yes, I pressed the 'tab' key to ask for the green signal.

Re: Screenshots & Videos

Posted: 21 Apr 2021, 13:53
by Alfacinha315
Another issue I found... The destination boards on the class 378 downloaded from the wiki aren't working.

Re: Screenshots & Videos

Posted: 21 Apr 2021, 15:54
by Michiel
Alfacinha315 wrote: 21 Apr 2021, 13:46 After the level crossing before Zeerwijk station, the trains towards Strandboulevard get a 10 limit of speed, causing delays. It is the second time this happens.
It seems you are driving in RET ATB mode, Simvliet Lightrail uses ZUB. The reason you can reach Zeerwijk is that this part uses dual signalling for the freight train, but as the freightrain branches off here the dual signalling ends.

Re: Screenshots & Videos

Posted: 21 Apr 2021, 16:07
by Alfacinha315
Michiel wrote: 21 Apr 2021, 15:54
Alfacinha315 wrote: 21 Apr 2021, 13:46 After the level crossing before Zeerwijk station, the trains towards Strandboulevard get a 10 limit of speed, causing delays. It is the second time this happens.
It seems you are driving in RET ATB mode, Simvliet Lightrail uses ZUB. The reason you can reach Zeerwijk is that this part uses dual signalling for the freight train, but as the freightrain branches off here the dual signalling ends.
Does it mean it's not a good idea run class 378 on line D?

There was a time when trains ran there without restrictions.

Re: Screenshots & Videos

Posted: 21 Apr 2021, 17:31
by MP 85
Alfacinha315 wrote: 21 Apr 2021, 13:46 After the level crossing before Zeerwijk station, the trains towards Strandboulevard get a 10 limit of speed, causing delays. It is the second time this happens.

My train was the 4121EV.

I turned off the ATB, in order to reach the Zeerwijk station and cancel the service from there.

And yes, I pressed the 'tab' key to ask for the green signal.
Looks like the zub no longer works on one of the two cabins I just tested, I thought I was the only one with this problem. @Sjored you can take a look ?

Re: Screenshots & Videos

Posted: 21 Apr 2021, 20:21
by Sjoerd
I see the problem (just did a testdrive....).
I haven't got a clue why this happens at the moment, as all settings seem to be right; it should just switch to ZUB as soon as the first ZUB222c trackmagnet is passed.
So for now.... Just switch the train to tripcock-mode (press A). That will allow you (and the AI) to drive, as Tripcock doesn't limit your speed.