Keyboard and Joystick
Below you can find a recent list with keys and their actions. (At this moment only the controls that are working)
In Beta 3.9 you can change the keyboard controls. You can not change everything like the move (free-camera) controls. You can only change the keys that are used for controlling the train.
If you give actions a key which already has an action, but can not be changed, thatwill cause two commands by pressing on only one key, and that's annoying.
Standard keyboard controls | |||
---|---|---|---|
Driving | |||
Ctrl+F4 | Switch cab on | Shift+F4 | Switch cab off |
< | Brake/Decrease power | > | Throttle/Increase power |
/ | Emergency brake (SG2 and RSG2 only) | Ctrl+L | Emergency button (SG2 and RSG2 only), allows use of track brakes on third rail mode |
Q | Control lever left (driving direction etc.) | W | Control lever right |
Enter | Horn | Shift+O | Decouple |
Power controls | |||
Ctrl+P | Raise pantograph (SG2, RSG2, SG3 and RSG3 only) | Shift+P | Lower pantograph (SG2, RSG2, SG3 and RSG3 only) |
Ctrl+I | Raise third rail shoes | Shift+I | Lower third rail shoes |
Ctrl+Shift+P | Disable pantograph protection | ||
Door control | |||
Insert | Unlock doors left | Home | Unlock doors right |
Delete | Open doors left | End | Open doors right |
D | Close doors | Ctrl+Shift+D | Disable door protection |
Train protection | |||
~ | Confirm deadman | Ctrl+TAB | Drive on sight (RSG2 and RSG3) |
Ctrl+Shift+A | automatic train protection | TAB | Ask for departure (ZUB) |
Other keys | |||
[ | Turn signal left | ] | Turn signal right |
\ | Alarm lights | C | Enable or disable the AI |
NUM / | Destination sign up | NUM * | Destination sign down |
Shift+/ | Train Number Down | Shift+* | Train Number Up |
Views | |||
1 | Camera cabin 1 | 2 | Camera cabin 2 |
3 | Outside camera | 9 | Free camera |
↑←↓→ | Move (free camera) | Ctrl+D | Benchmark mode (press twice) |
F1 | Traffic control | F2 | Traffic control console |
Ctrl+PageUp | Increase simulation speed | Ctrl+PageDn | Decrease simulation speed |
Numpad controls (Train driver views)
Only in Beta 3.9.
With the numpad controls below you can turn the train driver view to different directions, so you don't have to use the mouse. If you want to switch from train, you can click on the cabin of the train which you want to drive.
You can also switch from cabin by pressing [Ctrl + ↑] or [Ctrl + ↓].
Numpad (Train driver views) | |||
---|---|---|---|
↖ 7 |
↑ 8 |
↗ 9 |
Every button turns the train driver view towards the direction which is shown above the button |
← 4 |
5 |
→ 6 |
Numpad 5 has no function |
↙ 1 |
↓ 2 |
↘ 3 |
If this doesn't work try it again after switching the numlock on/off |
Getting Started | |
---|---|
Other |