hallo allemaal
ik vroeg me af of iemand weet of het mogelijk is om metros in en uit te laten rukken vanaf molens uitloop
michiel kan jij meschien andtwoordt hier op geven
molens uitloop
Moderator: senjer
Re: molens uitloop
Ja, dat kan. Kijk maar eens in de activity "event line AB.act". De eerste yard-pack is beta3b-mls.cty, waarin een trein vertrekt vanuit uitloopspoor MLS4.
CEO of the Rijndam Electrical Transport company
Re: molens uitloop
weet je ook toevallig die van stadionweg sjoerd
Re: molens uitloop
Nee, zover ik weet zijn die sporen bij Stadionweg geen depotsporen, maar enkel keersporen (in de 2020 route dan ook alleen voor direct keren, en niet voor opstellen).
Er zijn yardpacks voor depot-functionaliteit voor de opstelsporen bij Simvliet Airport, De Molens, Oostpark, Springstraat, en natuurlijk remise Bergpark.
Er zijn yardpacks voor depot-functionaliteit voor de opstelsporen bij Simvliet Airport, De Molens, Oostpark, Springstraat, en natuurlijk remise Bergpark.
CEO of the Rijndam Electrical Transport company
Re: molens uitloop
okeey en weet je de code line om ze te laten keren bij stadionweg
Re: molens uitloop
Toen ik aan het experimenteren was om daar een dienst te laten keren heb ik het onderstaande ingevoerd in het ctd-bestand, waardoor ik metro's met routecode A-CW (en een treinnummer eindigend op W) naar die sporen toe kon sturen. Dan is dat gewoon een eindpunt. Ze daar laten staan is echter geen optie; de rijweg voor de volgende rit (als die er is) wordt bij aankomst direct ingesteld.
<route code="A-CW" end="168,171" totaltime="600" reversetime="30" scrollsign="a-sdw">
<aimarkers>
<marker block="106" marker="106-1"/>
<marker block="107" marker="107-1"/>
<marker block="109" marker="109-1"/>
</aimarkers>
<times>
<depart platform="SVC2" time=" 0" destinationcode="24" station="svc" actions="stop" stops="svc1,svc2,svc3"/>
<stop platform="ADP1" time=" 90" destinationcode="24" station="adp" actions="stop" stops="adp1,adp2"/>
<stop platform="KVL1" time=" 165" destinationcode="24" station="kvl" actions="stop" stops="kvl1,kvl2"/>
<stop platform="BGN2" time=" 270" destinationcode="24" station="bgn" actions="stop" stops="bgn1,bgn2,bgn3,bgn4"/>
<stop platform="VMT1" time=" 345" destinationcode="24" station="vmt" actions="stop" stops="vmt1,vmt2"/>
<stop platform="RSL1" time=" 450" destinationcode="24" station="rsl" actions="stop" stops="rsl1,rsl2" scrollsign="a-bd"/>
<stop platform="SDW2" time=" 540" destinationcode="1" station="sdw" actions="stop" stops="sdw2,sdw3,sdw4,sdw5"/>
<arrive platform="SDWK" time=" 600" destinationcode="1" station="sdwk" actions="halt,finish" stops="sdwk,sdwk1,sdwk2,sdwk3,sdwk4"/>
</times>
</route>
<route code="A-CW" end="168,171" totaltime="600" reversetime="30" scrollsign="a-sdw">
<aimarkers>
<marker block="106" marker="106-1"/>
<marker block="107" marker="107-1"/>
<marker block="109" marker="109-1"/>
</aimarkers>
<times>
<depart platform="SVC2" time=" 0" destinationcode="24" station="svc" actions="stop" stops="svc1,svc2,svc3"/>
<stop platform="ADP1" time=" 90" destinationcode="24" station="adp" actions="stop" stops="adp1,adp2"/>
<stop platform="KVL1" time=" 165" destinationcode="24" station="kvl" actions="stop" stops="kvl1,kvl2"/>
<stop platform="BGN2" time=" 270" destinationcode="24" station="bgn" actions="stop" stops="bgn1,bgn2,bgn3,bgn4"/>
<stop platform="VMT1" time=" 345" destinationcode="24" station="vmt" actions="stop" stops="vmt1,vmt2"/>
<stop platform="RSL1" time=" 450" destinationcode="24" station="rsl" actions="stop" stops="rsl1,rsl2" scrollsign="a-bd"/>
<stop platform="SDW2" time=" 540" destinationcode="1" station="sdw" actions="stop" stops="sdw2,sdw3,sdw4,sdw5"/>
<arrive platform="SDWK" time=" 600" destinationcode="1" station="sdwk" actions="halt,finish" stops="sdwk,sdwk1,sdwk2,sdwk3,sdwk4"/>
</times>
</route>
CEO of the Rijndam Electrical Transport company
Re: molens uitloop
<route code="A-CW" end="168,171" totaltime="600" reversetime="30" scrollsign="a-sdw">
<aimarkers>
<marker block="106" marker="106-1"/>
<marker block="107" marker="107-1"/>
<marker block="109" marker="109-1"/>
</aimarkers>
<times>
<depart platform="SVC2" time=" 0" destinationcode="24" station="svc" actions="stop" stops="svc1,svc2,svc3"/>
<stop platform="ADP1" time=" 90" destinationcode="24" station="adp" actions="stop" stops="adp1,adp2"/>
<stop platform="KVL1" time=" 165" destinationcode="24" station="kvl" actions="stop" stops="kvl1,kvl2"/>
<stop platform="BGN2" time=" 270" destinationcode="24" station="bgn" actions="stop" stops="bgn1,bgn2,bgn3,bgn4"/>
<stop platform="VMT1" time=" 345" destinationcode="24" station="vmt" actions="stop" stops="vmt1,vmt2"/>
<stop platform="RSL1" time=" 450" destinationcode="24" station="rsl" actions="stop" stops="rsl1,rsl2" scrollsign="a-bd"/>
<stop platform="SDW2" time=" 540" destinationcode="1" station="sdw" actions="stop" stops="sdw2,sdw3,sdw4,sdw5"/>
<arrive platform="SDWK" time=" 600" destinationcode="1" station="sdwk" actions="halt,finish" stops="sdwk,sdwk1,sdwk2,sdwk3,sdwk4"/>
</times>
</route>
hier heb je halt op het einde staan
verander deze eens naar stop meschien dat je het nu niet hebt omdat die dan als eindpunt gezien wordt
<aimarkers>
<marker block="106" marker="106-1"/>
<marker block="107" marker="107-1"/>
<marker block="109" marker="109-1"/>
</aimarkers>
<times>
<depart platform="SVC2" time=" 0" destinationcode="24" station="svc" actions="stop" stops="svc1,svc2,svc3"/>
<stop platform="ADP1" time=" 90" destinationcode="24" station="adp" actions="stop" stops="adp1,adp2"/>
<stop platform="KVL1" time=" 165" destinationcode="24" station="kvl" actions="stop" stops="kvl1,kvl2"/>
<stop platform="BGN2" time=" 270" destinationcode="24" station="bgn" actions="stop" stops="bgn1,bgn2,bgn3,bgn4"/>
<stop platform="VMT1" time=" 345" destinationcode="24" station="vmt" actions="stop" stops="vmt1,vmt2"/>
<stop platform="RSL1" time=" 450" destinationcode="24" station="rsl" actions="stop" stops="rsl1,rsl2" scrollsign="a-bd"/>
<stop platform="SDW2" time=" 540" destinationcode="1" station="sdw" actions="stop" stops="sdw2,sdw3,sdw4,sdw5"/>
<arrive platform="SDWK" time=" 600" destinationcode="1" station="sdwk" actions="halt,finish" stops="sdwk,sdwk1,sdwk2,sdwk3,sdwk4"/>
</times>
</route>
hier heb je halt op het einde staan
verander deze eens naar stop meschien dat je het nu niet hebt omdat die dan als eindpunt gezien wordt
Re: molens uitloop
Dat heb ik ook al geprobeerd, geen effect. Ik wilde een metro daar ruim een kwartier stallen (ivm een keertijd van 18 minuten), maar wat ik ook deed, zelfs als ik het voor elkaar kreeg dat de rijweg terug niet direct werd ingesteld, dan was het nog steeds tien minuten te vroeg. Daarom heb ik de betreffende kerende metro uiteindelijk maar naar Stadionweg spoor 5 gestuurd.wertyton wrote: hier heb je halt op het einde staan
verander deze eens naar stop meschien dat je het nu niet hebt omdat die dan als eindpunt gezien wordt
De metro zag het keerspoor zelf overigens wel gewoon als eindpunt; hij schakelde op de AI netjes uit en het treinnummer veranderde voor de volgende rit. Het was de timing van de rijweginstelling die ik niet goed kreeg, zelfs niet met de timer-commando's om naar de vertrektijd te kijken, zoals dat bij de andere eindpunten (zoals SDW5, of De Molens) wel werkt.
CEO of the Rijndam Electrical Transport company
Re: molens uitloop
ik zal zelf ook wel effe puzzelen voor je gozer
Re: molens uitloop
Bijgaand de testversie die ik had gemaakt. Dienst 103 moet om 10:34:25 uur vertrekken vanaf het keerspoor, maar de rijweg wordt al rond 10:23 uur ingesteld.wertyton wrote:ik zal zelf ook wel effe puzzelen voor je gozer
(de activity begint om 10 uur, dus enig doorspoelen is wel nodig )
- Attachments
-
- TestKeren SDWK.zip
- (11.27 KiB) Downloaded 213 times
CEO of the Rijndam Electrical Transport company