Release: VT98 Schienenbus

General discussions

Moderator: senjer

Post Reply
User avatar
Sjoerd
Posts: 5676
Joined: 26 Dec 2014, 21:14
Location: Alphen aan den Rijn

Release: VT98 Schienenbus

Post by Sjoerd »

This is the release of the German VT98 Schienenbus (Railbus), usable in Metrosimulator 3.15 or higher. :)

Image

Created in the 1950's, the cheap construction and exploitation of these trains saved many lines with low passenger numbers from closing.
They were also used to save on locomotives, as they where strong enough to also take along a few freight wagons (hence a separate diesel
locomotive was not needed).

Download: https://filehorst.de/d/dDGoapEF

INSTALLATION:
-----------------
-> Copy "VT98.000" to the folder where Metrosimulator.exe is located.
-> Copy the folder "Data" to the same location. This contains an activity for Rijndam 2022 (v1.4) using this train.


DRIVING INSTRUCTIONS:
-----------------------------

1. Enter the driver position in the direction of travel (click on the prefered end of the vehicle).
2. Open the driver desk cover -> Shift+X
3. Activate the cab -> Ctrl+F4
4. Activate the diesel engine -> Ctrl+E
5. When you have a green signal, close the doors (-> D) and depart!

When changing driving directions, you may leave the engines 'on' when shutting of the cab.
Don't forget to close the driver desk cover when you leave the cab (-> Shift+X)!

Notes:
--------
  • The train has been fitted with ATB-E (ATB "Eenvoudig", simple version) in order to be usable on the Rijndam en Simvliet railway networks.
    This system enforces maximum speed, but does so in the background (so no deadmen-switch buzzer every 30 seconds). I did however build in the red pointer on the outside edge of the speedometer, to show for which speed the system recieves a signal.
    If no signal is recieved (for example; you are not on a track with ATB trainprotection), then it will by default enforce a maximum speed of 40 km/h.
  • The train is 3 meters wide. It will NOT fit along metro platforms. So keep to the railway lines.
  • This train does not have door protection; you can drive with the doors open (only; doors can not be opened while the vehicle is in motion).

Special Animations:
------------------------

From VT98 Triebwagen / motorcar, cabposition 1 (driver position):
  • Shift+X: open/close drivers desk cover
  • Ctrl+X: open/close windows
  • Ctrl+Shift+X: open/close WC door
From VT98 Triebwagen / motorcar, cabposition 2 (driver position):
  • Shift+X: open/close drivers desk cover
  • Ctrl+X: Change passenger seats direction

From VB98 Beiwagen / trailercar, cabposition 1:
  • Ctrl+X: open/close windows
  • Ctrl+Shift+X: open/close WC door
From VB98 Beiwagen / trailercar, cabposition 2:
  • Ctrl+X: Change passenger seats direction

From VB98 Beiwagen 'Dienst' / trailercar with bagage area, cabposition 1:
  • Shift+X: open/close windows
  • Ctrl+X: Change passenger seats direction
  • Ctrl+Shift+X: open/close WC door
From VB98 Beiwagen 'Dienst' / trailercar with bagage area, cabposition 2:
  • Ctrl+X: open/close door between bagage area and passenger compartment

From VS98 Steuerwagen / drivercar (without motor), cabposition 1:
  • Shift+X: open/close windows
  • Ctrl+X: Change passenger seats direction
  • Ctrl+Shift+X: open/close WC door
From VS98 Steuerwagen / drivercar (without motor), cabposition 2 (driver position):
  • Shift+X: open/close drivers desk cover
  • Ctrl+X: open/close door between bagage area and passenger compartment

Recommended routes in Metrosimulator for this train:
------------------------------------------------------------------
  • Simvliet: Simvliet Centraal - Simvliet Haven
  • Rijndam 2022: Zeeburg - Zeeburg Haven
  • Rijndam Railways 2022: Rijndam Centraal - Denia (will be ready soon)
CEO of the Rijndam Electrical Transport company :D
User avatar
Trainzdriver328
Posts: 204
Joined: 17 Oct 2019, 00:47
Location: Germany

Re: Release: VT98 Schienenbus

Post by Trainzdriver328 »

I noticed a bug: If you press button 9 (free camera) while driving and the train has passed the camera, you can still hear the rolling sound of the train.
A German Train Simulator Gamer! 🎮🎮 🚄🚄
User avatar
brozma
Posts: 489
Joined: 11 Sep 2013, 16:27
Location: Prague, Czech Republic

Re: Release: VT98 Schienenbus

Post by brozma »

Ah. Another rolling stock. Let's do some tests.

@Sjoerd: If you would mind, in "Rijndam" topic, I mentioned another czech rolling stock, which could be suitable with Metrosim and is very similiar to VT98 Schienenbus. Look here if you missed it.
If you want to make a very fast ride, just disable ATB/ZUB, put trottle to 1.00 and enjoy.
In my Avatar is a Logo of a Prague metro.
Sorry for my bad English. I am Czech and i am learning English
User avatar
Sjoerd
Posts: 5676
Joined: 26 Dec 2014, 21:14
Location: Alphen aan den Rijn

Re: Release: VT98 Schienenbus

Post by Sjoerd »

I don't miss much ;)
That blue-white model has some potential (so it could become a future project), but at the moment I prefer to do some route-building again first ;)
CEO of the Rijndam Electrical Transport company :D
User avatar
Nicolas
Posts: 166
Joined: 22 Jan 2020, 23:18

Re: Release: VT98 Schienenbus

Post by Nicolas »

Can ATP be disabled in this train? I always run with ATP disabled but it doesn't turn off on this.
User avatar
RotterdamMetroLover
Posts: 729
Joined: 23 Jan 2017, 15:21
Location: Somewhere in this blue world.

Re: Release: VT98 Schienenbus

Post by RotterdamMetroLover »

Max speed is 90 km/h.
Post Reply