Metrovagonmash 81-717
Moderator: senjer
- Alfacinha315
- Posts: 1033
- Joined: 16 Sep 2016, 14:20
Re: Metrovagonmash 81-717
Maybe in beta 3.14 or higher?
Greetings from Lisbon, the capital city of Portugal.
- RotterdamMetroLover
- Posts: 729
- Joined: 23 Jan 2017, 15:21
- Location: Somewhere in this blue world.
Re: Metrovagonmash 81-717
Michiel wrote: ↑29 Jan 2018, 20:17 Don't worry, when my Simvliet Lightrail plans are completed I will have to release them as there isn't enough RSG3/SG3/HSG3 stock to serve all four lines then. But not the entire Simvliet Lightrail project will be finished at once, so I could delay it a few betas more...
Re: Metrovagonmash 81-717
I have one problem with this stock. If i spawn at Rijndam Airport ( and the Airport depots ) and make this version
add Driver car
add Passenger Car
add Passenger Car
add Driver car
add Passenger Car
add Passenger Car
add reversed Driver car
then the both driver cars at the end and front are showing in the wrong directions. at the Molenwijk depot there are no problems. also if i do
add Driver car
add Passenger Car
add reversed Driver Car
both driver cars are in the wrong direction!
What is the problem?
add Driver car
add Passenger Car
add Passenger Car
add Driver car
add Passenger Car
add Passenger Car
add reversed Driver car
then the both driver cars at the end and front are showing in the wrong directions. at the Molenwijk depot there are no problems. also if i do
add Driver car
add Passenger Car
add reversed Driver Car
both driver cars are in the wrong direction!
What is the problem?
- Attachments
-
- 0.6.png (195.48 KiB) Viewed 6213 times
-
- 0.4.png (334.07 KiB) Viewed 6215 times
Re: Metrovagonmash 81-717
It's the spawnpoints in those positions. They have a "reversed" setting. In activity mode this works perfectly, but in explore mode it reverses not just the entire train, but also each individual carriage. So in explore mode; begin with a reversed 81-717, and it will appear the correct way
CEO of the Rijndam Electrical Transport company
- Alfacinha315
- Posts: 1033
- Joined: 16 Sep 2016, 14:20
Re: Metrovagonmash 81-717
Hello. Here's the M1 Normal Service activity (Rijndam 1985) with 81-717, instead of MG2. The only problems I found were about trains at GRM2 and RCS1 spawned with the cabs turned off. Also, instead of going directly to one train at Molenwijk the activity starts at Centraal Station...
Feel free to help me solve these issues.
Feel free to help me solve these issues.
- Attachments
-
- M1_NormalService 81-717.zip
- (5.41 KiB) Downloaded 209 times
Greetings from Lisbon, the capital city of Portugal.
Re: Metrovagonmash 81-717
Alfacinha315 wrote: ↑25 Feb 2019, 13:29 The only problems I found were about trains at GRM2 and RCS1 spawned with the cabs turned off.
Feel free to help me solve these issues.
If you do not tell the simulator in the act-file to spawn the train with a cab turned on.... yes, then it remains off.
<consist start="RCS1">
<train pack="Moscow" file="81-717.xml">
<car id="0" scrollsign2="24"/>
</train>
<train pack="Moscow" file="81-714.xml"/>
<train pack="Moscow" file="81-714.xml"/>
<train pack="Moscow" file="81-714.xml"/>
<train pack="Moscow" file="81-714.xml"/>
<train pack="Moscow" file="81-717.xml" reversed="true">
<car id="0" scrollsign2="24"/>
</train>
</consist>
<consist start="GRM2">
<train pack="Moscow" file="81-717.xml">
<car id="0" scrollsign2="24"/>
</train>
<train pack="Moscow" file="81-714.xml"/>
<train pack="Moscow" file="81-714.xml"/>
<train pack="Moscow" file="81-714.xml"/>
<train pack="Moscow" file="81-714.xml"/>
<train pack="Moscow" file="81-717.xml" reversed="true">
<car id="0" scrollsign2="24"/>
</train>
</consist>
After all; for a computer, interpretation of intentions is still a bit too difficult; you really have to tell it what to do. If you don't, it doesn't do anything.
And that's a good thing too; it would be a nightmare if the computer starts making up actions on it's own, thinking it knows what you want it to do... if it mis-interprets what you want, you would spend more time correcting the computer then you are actually programming your activity
How to do it.... Look at this example:
<consist start="DMP2">
<train pack="RET" file="5200-1982.xml" number="5203">
<car id="0" scrollsign1="6.0" scrollsign2="22"/>
<car id="1" scrollsign1="0.0" scrollsign2="22"/>
<cab id="0" enabled="true" ai="202"/>
</train>
<train pack="RET" file="5200-1982.xml" number="5204">
<car id="0" scrollsign1="0.0" scrollsign2="22"/>
<car id="1" scrollsign1="8.0" scrollsign2="22"/>
</train>
</consist>
Yes, you also forgot to tell the simulator were you want the player to be. As you did not do that, you end up at the same location as when you load the network in explore mode.Also, instead of going directly to one train at Molenwijk the activity starts at Centraal Station...
How to do it.... Look at this example:
<consist start="A03">
<train pack="RET" file="5000-1994.xml" number="5001">
<cab id="0" mycontrol="true" />
</train>
<train pack="RET" file="5000-1994.xml" number="5002"/>
<train pack="RET" file="5000-1994.xml" number="5003"/>
<train pack="RET" file="5000-1994.xml" number="5004"/>
</consist>
CEO of the Rijndam Electrical Transport company
- Alfacinha315
- Posts: 1033
- Joined: 16 Sep 2016, 14:20
Re: Metrovagonmash 81-717
Thanks for your help Sjoerd.
Here's the correct file... Enjoy.
Here's the correct file... Enjoy.
- Attachments
-
- M1_NormalService 81-717 (2).zip
- (5.44 KiB) Downloaded 228 times
Greetings from Lisbon, the capital city of Portugal.
- Alfacinha315
- Posts: 1033
- Joined: 16 Sep 2016, 14:20
Re: Metrovagonmash 81-717
Off-topic: this is what would happen if we really had passengers on the simulator...
https://www.gif-vif.com/When-metro-says-no
https://www.gif-vif.com/When-metro-says-no
Greetings from Lisbon, the capital city of Portugal.